Home > Knowledge > Content
The preparation and installation of the slant bed CNC lathe before operation
May 14, 2018

Slant bed CNC lathe is a high-precision, high-efficiency automated machine tool. Equipped with a multi-station turret or power turret. The machine tool has a wide range of processing performance and can process linear cylinders, slash cylinders, arcs, and various types of threads, grooves, worms, and other complex workpieces. With linear interpolation, circular interpolation of various compensation functions. And played a good economic effect in the mass production of complex parts.

The inclined bed CNC lathe can be equipped with power tool function and 8-station turret tool holder. Can meet the different needs of the processing. Applicable to the processing of various products, small and medium batch products. For complex, high-precision parts show its superiority.

Preparation of slant bed CNC lathe before trial operation

  1. After the geometric accuracy of CNC lathe is qualified, the whole machine needs to be cleaned. Use cotton cloth or silk cloth impregnated with detergent and do not use cotton yarn or gauze.The anti-rust oil or anticorrosive paint applied to protect the guide surface and the processing surface when the CNC lathe of the inclined bed is cleaned. Clean the dust on the outer surface of the machine. Apply sliding oil to each sliding surface and working surface.

  2. Carefully check whether all parts of the CNC lathe are added with oil as required. If the cooling tank is filled with sufficient coolant. Whether the oil of machine tool hydraulic station and automatic lubrication device is to the position specified by oil level indicator.

  3. Check whether the switches and components in the electrical control box are normal, and whether the integrated circuit boards are in place.

  4. The power of the lubrication device is to be used to lubricate the lubricating parts and lubricating oil roads. Prepare all parts of the machine tool before each part.

The installation of slant bed CNC lathe

The slant bed CNC lathe is placed on the foundation, should be in the free state. Then bolt the anchor bolts evenly.

For ordinary machine tools, the level reading of the level is not more than 0.04/1000mm.

For high-precision CNC machine tools, the level is not more than 0.02/1000mm.

When measuring the installation precision, it should be carried out at constant temperature. The measuring tool should be used after a period of fixed temperature.

In the installation of CNC lathe, the installation method of forced deformation should be avoided.

The machine tool should not be dismantled when installing the lathe.

The disassembly of the parts may lead to the important new distribution of the internal stress of CNC lathe, thus affecting the precision of CNC machine tool.